Many people have not seen the production process of the pole. How to
make the hollow in the middle? The production process of the pole is
very complicated. Be careful and rigorous. We should strictly control
the quality of every link. The workers in the workshop are also
This is the raw material for production, steel wire in the middle, sand and gravel in the distance.
1、首先需要将钢丝盘直，州苗木 保定电动门 保定空压机 化粪池模具 微型蠕动泵 保定强夯 收费岛模具屋子里面有一个盘条机，因为逆光没有拍到，它把一捆一捆的钢丝盘直。。
1. First of all, the steel wire needs to be straightened. There is a
wire rod machine in the room. Because the backlight didn't shoot, it
straightens the bundles of steel wire..
2. According to the length of the pole, cut the coiled straight steel
wire into the required length. The steel wire is to be made into the
reinforcement of the cement pole (equivalent to weft).
3. This is the mold for the cement pole, two halves.
4. Each pole should have at least 8 steel bars. In order to be stable,
our company requires 12 steel bars (this is more than one steel bar). At
the same time, the weft wire coiled into a compass with thin steel wire
is surrounded by the steel wire used as weft wire, and the binding
place is bound with iron wire, so that the keel of cement pole can be
found in tThen fill it with a certain proportion of